Replacement of water supply

     Not often, but sometimes by replacing the plumbing in the house for various reasons - in emergencies, in case places the batteries for showers and sinks or outdated and corroded metal plumbing. When replacing the tiles in bathrooms is also helpful if the plumbing is outdated to use time and be replaced with a new one. And naturally the new pipeline to carry PVC pipes. What is needed for this purpose:
     You need a machine for gluing. May be taken from a friend or rent a few days, one bathroom and kitchen two days are enough.
     You must select the assembly. Depending on the pipes and fittings are commercially available PVC pipes with 3 types of joints. The easiest are mechanical, as they neither glue nor winding, but the fittings are rather bulky and are more suitable for outdoor plumbing.
     The most popular are polypropylene pipes glued both they and fittings to them. There polypropylene pipes with aluminum insert fittings as they are with metal thread.
      No longer standard height when towing a new plumbing. Before the standard was 1.20 m from the floor, but now most often pull of 0.30-0.40 cm. You have anywhere to use the same height.
     But to not interfere "hot" and "cold" pipe, regardless of the height of the conduit between the two pipes must be 18-20sm distance and "hot" pipe to go top.
     When replacing the metal with PVC plumbing must be careful with the amount. The easiest way to replace old plumbing to remove metal pipes and straight to their site to download new PVC. In this case, and any other, must comply sizes. They coincide, but their signature is different. Old tube of 1/2 inch PVC pipe meets from F18, 3/4-inch metal pipe is f25 and the pipes of 1 inch PVC pipes meet from d = 32.
     Consider new batteries. When you download new plumbing must comply with local battery showers and sinks. Battery has standards that apply now. These soul to be installed at a height of 60 to 80 centimeters. Batteries sink with solid height of 115 cm when the battery is mounted on the wall. But if the battery is mounted on the countertop or ceramic bowl in the sink, then you should consider what position to leave external plumbing fittings to fit the implementation of the soft battery connection. Usually in such cases the output fittings leave less to his prikiriyat of countertop or sink.
     It is important dense grouting pipes to the wall to vibrate, and subsequently cause an unpleasant noise in the house. This can be done with special brackets that fix the pipes to the wall, of course in excavated for the purpose channels. Top is made zamazaka on it and glued tiles.