Painted and insulated with thermal paint

           How is this possible? Again there is a commercial trick here! These are the first questions that arise before nas.Sega will explain how to obtain the heat insulating effect with just one painting.
                     Product - Neotherm AC thermo acrylic based paint which contains many glass microspheres (bubbles). They closed themselves in the air and when applied paint on the wall or ceiling creates a coating thickness of which depends on the damage speech at 2 to 4 layers it from 0.3 to 0.5 mm. This termopokritie comprises a plurality of glass spheres, which create a shield in front of the wall and does not allow the passage of heat and thus the room is cooled. In studies of the walls coated Neotherm AC has been found that by 3-4 degrees higher contact temperature of the treated surface. This temperature difference provides us with a real saving of 8 to 10% of heating costs. This is an easy and fast way how to isolate the outer walls and ceiling of our home and enjoy the savings achieved, as this is not all.
        Very often precisely in the winter months notice slain mold and mildew around windows or in corners of rooms. The fight is fierce with all sorts of products, appliances and mushrooms clean these formations, but alas it is temporary. Once we re-painted areas not cleaned passes month and noticed with horror that mold again is killed in the same place. There is no way we decide to spend the winter with him as much as we unpleasant, and it grows and grows. We can banish this unwanted guest from our home. Thanks to termopokritieto wall surfaces are already at a higher temperature, and growth of mold and mildew is prevented permanently. Protivoplesenni and anti-condensation properties are durable and do not diminish over time.


  Neotherm AC represents a snow white liquid substance of the acrylic-based (a bit more dense than latex, but with less weight because of conflict microspheres) which may be colored with conventional colorants for water-based latex and thus to achieve the desired you color.
         It is important to note that the thermally insulating coating on the walls should be finishing is not a good idea to be painted over with latex for example. Apply with a brush or roller longhaired, not thinner in painting. The material has very good adhesion to all building materials. Cover with ease surfaces with complex shapes and structures, including and heterogeneous material. Allows the surrounding structures to "breathe." Does not retain dirt and dust and is easily cleaned with a damp sponge or cloth.
Packaging which offers Neotherm AC are 1, 3 and 10l. As long as one liter of 3.5 to 4 m2 for two layers.
Information was used from: http: //izobul.com/

Interior paint "Megachim" saves 25% of energy for heating

The new product - water-based paint "THERMILATE", producing "Megachim" Ruse is based on water dispersion latex paints, added to which are ceramic microspheres. They represent a conversion product of the military NASA. Used first in ceramic panels lining the missiles as their good thermal insulation and toploreflektorna capability makes it possible to realize a large temperature range of the two opposing surfaces of the heat-insulated element.
Sample 4 cm ceramic panel with such a filler allows the outside temperature is 1200-1300 ° C, but within about 30-40 ° C and stirred at this temperature difference computer systems operate properly.
These fields as a component of the paint THERMILATE enable about 95% of the heat energy which is transmitted by radiation with a wavelength of about 300 nm to be reflected. That is, unlike the traditionally used insulation means that slow the transfer of heat, the paint THERMILATE have radically different mechanism of action - it reduces the amount of heat transmitted.
If external facades painted with such paint - then in the summer months when there is intensive solar radiation, resulting in reflection of the radiation flux will realize significant savings of electrical energy needed to cool the rooms. The reason for this is the fact that the outer insulation actually only slows the passage of heat flow through it, while reflective qualities of ceramic spheres which are sized to 100 microns reflect infrared flux.
Damage inside the premises, the paint plays termoreflektor. The use of "THERMILATE", on the walls receive energy savings up to 25%. When roofs, this value is higher - up to 40%. These values ​​are established tests made by the Center for Research and Design at the University.
The task was to establish in the laboratory energy-saving effect of using water-based paint "THERMILATE", producing "Megachim" Ruse
The experiment:
In the fully closed (no windows) basement, for 168 hours by an electric stove with 2 KW power is maintained using a thermal relay temperature of 20 ± 1 ° C. The spent this period electricity is reported by meter with accuracy 0,1 kWh.
Then, on the walls of the room, by means of a roller is applied a layer of paint vodospersnata "Thermilate" at a rate of 0,330 kg / m2. After drying of the paint, the resulting film has a thickness of 0, 285 - 0,300 mm.
When completely dry film on the surface of the walls of the chamber is again started by maintaining the temperature in the chamber of 20 ± 1 ° C. by the same electric heater using a thermal relay.
Experimental results:
Consumed power without the use of water-based paint "THERMILATE", for 168 hours, pripoddarzhana t in 20 ± 1 ° C - 26,9 kWh
Consumed electric energy from the surface of the walls of water-based paint "Thermilate" for 168 hours, pripoddarzhana t in 20 ± 1 ° C - 20,55 kWh
Saving electricity by using water-based paint "Thermilate" - 23,7%
The conclusion:
As a result of the experiments, concluded that the used water-based paint "THERMILATE" has termootrazhatelni properties for heat flow razprostaranyavasht through radiation. As a result, its property, realize significant energy savings in ramnite of 23-24%.
This gives rise tested water-based paint "THERMILATE" to be recommended as an energy-saving element of insulation systems in buildings and in particular facades.
The energy-saving paint "THERMILATE" is also suitable for interior painting of walls, ceilings, and also for metal surfaces (eg. Trabovoprovod) to reduce energy costs. This product has a number of advantages over traditional coatings. Besides reducing energy costs up to 25%, does not require special equipment, and is applied with traditional spray equipment, which saves the cost of labor. The time for dyeing is also reduced as a single layer dries within 2-3 hours and the surface is ready for application of the next.
An important feature of the paint that forms a "hot" wall surface, which prevents condensation and potential development of mold and mildew.
Painted surfaces can be cleaned with water and detergents. Prior to application, the paint can be colored with
tinting pigment pastes.

http://www.jilishta.com/



 IzomaksTERM
Liquid insulation against mold and condensation!
Eliminate the causes of condensation and mold!
IzomaksTERM represents decorative heat-painted on interior walls and ceilings on the basis of water dispersion and special polymer microspheres. It can be tinted with dye to ordinary latex.
In its work texture, packaging, technology and application of decorative qualities similar product is of high quality acrylic latex, but at the same time presence in the composition of the special microspheres work towards improving the thermal insulation properties of the treated surfaces. The ratio of coverage of toplopronitsaemost IzomaksTERM is 11 times lower than that of ordinary latex coating. Toplopronitsaemost low rise to high contact temperature for the walls and ceilings of the rooms in winter, which determines the high anti-condensation and energy-saving properties of the coating.
IzomaksTERM meets the requirements of BS EN 13300.
BENEFITS
Insulation
Special polymer microspheres are elastic round closed cell with a very small surface area, which absorb heat only superficial and immediately emit most of it back. Following this reflective effect is reduced the intensity of heat transfer, and hence reduce heat loss. Since the areas are polymeric, they are elastic and can not be broken by stirring of the material as otherwise occurs with materials comprising ceramic or glass spheres. The size of the microspheres in IzomaksTERM is 20-30 microns, which is 4 times less than the amount of the ceramic and glass spheres. That is why the effect of heat-is much bigger and much more palpable, even to the touch.
Low toplopronitsaemost
The specific composition and structure of IzomaksTERM form coating with a low coefficient of toplopronitsaemost - ß = 1.58 W.h0.5 / m².K comparison ß = 18.3 W.h0.5 / m².K for ordinary latex paint, which provides hot contact surface the wall surfaces, prevents the formation of condensation and makes you feel comfortable - the walls are no longer "pull" and do not emit "cool".
Energy saving effect
When predominant in Bulgaria heating mode "off - morning and inclusion - night" warming of the premises began warming after the cold wall construction. Heat-reflecting effect of the coating with IzomaksTERM ensures rapid warming of the room, respectively, lower costs for heating and electricity. In the summer heat from entering the premises.
Health Benefits
Mold spores are everywhere and need constant moisture to develop and mold is a proven cause of asthma and respiratory problems. After coating of IzomaksTERM surface temperature of the walls is increased, and reduces the possibility of occurrence of condensation which prevents the appearance of mold and mildew on the walls, thus creating health of living.
Environmental effect
The Council of Europe and European Parliament Directive 2004/42 / EC limited the content of volatile organic compounds (VOCs) in various kinds of paints to reduce harmful emissions into the atmosphere, as well as direct inhalation of paint or rightful occupants of the room. VOC content of IzomaksTERM is below 0.1 g / l, which is 300 times less than the maximum levels under the Ordinance limiting emissions of volatile organic compounds (SG 25 of 30.03.2010).
Breathable effect
Microporous structure of heat-latex IzomaksTERM provides high vapor permeability of coatings - walls can "breathe" and extremely low density of the microspheres results in a low density of coverage, hence increased thermal insulation capability.
Volume effect
Cover with IzomaksTERM not affect the size of the premises, not narrowing them, provides an opportunity for laying all inaccessible places, no joints, no "thermal bridges" in the corners of rooms.
http://www.hydromax.bg/

Thermoceramic coverage SuperShild
TermoPokritiyata constitute a liquid dispersion solution of a pure acrylic resin, about 50% ceramic vacuum microcapsules and special additives. Efforts by the relevant technology as the ultimate finish after drying form lasting decorative and insulating layer with the following qualities:
- Formed a warm wall surface. In heating mode ensures 3-4 ° C higher temperature wall and ceiling surfaces in the premises than traditional decorative materials. Treated with Thermoceramic coating walls are warm to the touch and does not create a feeling of chill in the vicinity (not "pull").
- Prevent condensation, moisture and mold. The surface wall and ceiling temperatures are close to the temperature of the adjacent air, always higher than the dew point. Protivoplesenni and anti-condensation properties are durable and do not diminish over time.
- Energy-saving effect. Little difference between the temperature of the wall surface and the adjacent air conditioned low density of heat flow in the corresponding surrounding structure, resulting in heat loss through decreased from 8 to 15%.
- Very good adhesion to all building materials. Cover with ease surfaces with complex shapes and structures, including and heterogeneous material.
- Good paroprovodimost. Allow the surrounding structures to "breathe."
- Do not keep dust and dirt cleaned easily with a damp sponge or cloth.
- Rich color palette.
  Coloring in desired color standard colors for latex recommended soft pastel tones.
Packaging:
SuperShild 1 liter - about 2.7 to 3 m2
SuperShild 3 liters - about 8-9 m2
SuperShild 10 liters -for 27-30 m2
http://markita.net/


TERMOMAX-Interior
Many of us face the problem of mold. Causing it the spores of the mold which are in furniture, in soil in pots, even in the human skin. Combined with increased humidity in the room, these spores can develop into mold by choosing cold surfaces on which to grow. The forming mold is not only an eyesore but can lead to serious health problems. Therefore it is very important to provide good ventilation in your home, and ventilated regularly. These measures do not always help - a good helper in the fight against mold and mildew is termoboyata that, once applied, increases surface temperaura the treated surface 3-4oS.
TermoPokritiyata constitute a liquid dispersion solution of a pure acrylic resin, about 50% ceramic vacuum microcapsules and special additives. Efforts by the relevant technology as the ultimate finish after drying form lasting decorative and insulating layer with the following qualities:
Formed warm wall surface. In heating mode ensures 3 - 4 ° C higher temperature wall and ceiling surfaces in the premises than traditional decorative materials. Treated with Thermoceramic COATINGS walls are warm to the touch and does not create a feeling of chill in the vicinity (not "pull").
Prevents condensation of moisture and mold. The surface wall and ceiling temperatures are close to the temperature of the adjacent air, always higher than the dew point. Protivoplesenni and anti-condensation properties are durable and do not diminish over time.
Energy saving effect. Little difference between the temperature of the wall surface and the adjacent air conditioned low density of heat flow in the corresponding surrounding structure, resulting in heat loss through decreased from 8 to 15%.
Very good adhesion to all building materials. Cover with ease surfaces with complex shapes and structures, including and heterogeneous material.
Good paroprovodimost. Allow the surrounding structures to "breathe."
Keep dust and dirt cleaned easily with a damp sponge or cloth.
Rich color palette. The color is white, but may be colored in a desired color standard colors for latex recommended soft pastel tones.
Ecology. Thermoceramic coverings have an ecological certificate and are harmless to your health. Suitable for people with allergies, because they keep dust and dirt and prevent the growth of mold and mildew.
http://www.infraheat.bg/


TERMOMAX - Exterior Metal
Universal flexible with comfort thrown sunscreen and waterproof façade coating
TERMOMAX Exterior Metal is a liquid dispersion solution of a pure acrylic resin, about 15% ceramic vacuum microcapsules and special additives. Laid in resp technology, after drying forms a continuous smooth, high strength and long-lasting insulating layer of the highest class's operating.
Reflection of the solar radiation - 90% (RNIR = 91.72%). When exposed to sunlight, 10-15oS ensure a low surface temperature of the wall structures as compared to the conventional decorative material. Reduced to 30% the cost of air conditioning;
Reduced emission of heat - over 15% (F = 0.75 - Low-E-coating). Laid out on the building envelope reduces the radiation of heat to the environment and in winter reduced to 8% heating costs.
High vodoustoychivost.Ne prevent penetration of atmospheric moisture in building structures due to rain, snow or fog and thus dalgostrochno retain their insulating qualities. Highly internal forced and condensing humidity (bathrooms, kitchens and laundry rooms).
Flexibility and add flexibility. Fills surface microcracks occurring during drying of the plaster and prevents occurrence of new result of the natural aging of the wall structure. Ensure lasting surface finish.
Very good adheziyakam any building materials. Cover with ease surfaces with complex shapes and structures, including and heterogeneous material.
Resistant to ultraviolet rays and the "acid" rain.
Does not retain dust and dirt. Holds etc. "Lotus effect" (*), thanks to which on treated surfaces do not hold water, dust and dirt.
High degree of color belota.Beliyat recommended in practice, but it is possible staining in light pastel colors as necessary.
Durability. Guaranteed lifetime - more than 10 years.
ANNEX:
In all cases where it is necessary to achieve lasting aesthetic design of steel structures and buildings, combined with protection from solar overheating, reliable insulation from rain and snow and corrosion protection.
Unbeatable for decorative and improve thermal insulation parameters of buildings of architectural and historical value, as well as structures with complex geometry.
Particularly suitable for retrofitting of blind walls exposed to direct weathering. In combination with other thermal insulation (min 5 cm. Thick) reduces heat loss and prevent hypothermia in winter conditions.
Based on previous permanent coating on glass and plastic surfaces.
Waterproof, sunscreen and anti-corrosion coating of metal roofing, metal structures and tanks (laying on a special primer).
TECHNOLOGY APPLICATION:
Dotri two hands with a brush or roller in 4 - 6 hours on old paints or sealants, best acrylic on metal primer (red). Suitable for use on all building surfaces with the exceptions of fresh bitumen. Surfaces must be sound, free of dust and grease. Film thickness min 0,3-0,4 mm, usage in a smooth surface from 0.3 to 0.4 l / m2. Optimum application temperature 15 - 25oC.Obrabotenata surface to protect from moisture min. 24 hours after applying the last layer.
· Do not dilute! Dobyavyaneto water leads to deterioration of the insulation film and hindering polymerization!
· To mix well before applying! By careful homogenization is achieved a uniform distribution naizolatsionnite agents in solution.
· Roller and brush before starting work to dry - do not contain water or other solvents!
(*) "Lotus effect" - a characteristic of the surface layer of the coating, allowing it to clean itself of impurities in the process of exploitation.
http://www.infraheat.bg/
TERMOMAX - Elastic
TERMOMAX ELASTIK is a liquid dispersion solution based on 100% acrylic resin and about 20% ceramic vacuum microcapsules and special additives. Laid in resp technology, after drying forms a continuous smooth, elastic, high-strength and durable insulating layer, having the following characteristics:
Reflection of solar radiation - over 85%. Exposed to sunlight, ensure 10-15oS lower surface temperature of the wall and roof structures compared with the traditional decorative materials. Reduced to 30% the cost of air conditioning;
High waterproofing capability. Suitable to solve any type of waterproofing problems. Cover with ease surfaces with complex shapes and structures, including and heterogeneous material.
Linear expansion (stretching) before the break - up to 300% (three times the length!) Therefore bear with ease the maximum possible line extensions, especially in metal and prefabricated structures.
Very good adhesion to all building materials.
Steam lines. Allows the surrounding structures to "breathe."
Resistant to ultraviolet rays and the "acid" rain.
Keep dust and dirt cleaned easily.
High degree of whiteness. The white color is recommended in practice, but it is possible coloring in soft pastel colors, if necessary.
ANNEX:
In all cases where it is necessary simultaneously preventing solar overheating in summer and reliable waterproofing of rain and snow - flat roofs, side walls and more.
Unbeatable in waterproofing dome, hiperboloidni and other roof structures with complex geometry.
Particularly suitable for roof renovations and waterproofing around chimneys and ventilation chapters / in combination with geotextile /.
The best solution for wall waterproofing, made of aerated concrete (YTONG)
Waterproofing balconies and bathrooms. Terrazzo tiles are glued on ELASTIK directly with adhesives type C-400.
Waterproofing of pools, fountains and reservoirs.
Waterproof coating of metal roofing in the areas of working joints.
Ideal waterproofing insulation of vertical joints in panel constructions.
TECHNOLOGY APPLICATION:
With a roller or brush on both hands in 12 hours on the ground:
in vertical elements - film thickness 0,4- 0,5 mm
in horizontal elements - film thickness 0,7 - 1,0 mm.
http://www.infraheat.bg/