Insulation coatings

     TermoPokritiyata constitute a liquid dispersion solution of a pure acrylic resin, about 60% ceramic vacuum microcapsules and special additives. Efforts by the relevant technology as the ultimate finish after drying form lasting decorative and insulating layer with the following qualities:

- Formed a warm wall surface. In heating mode ensures 3-4 ° C higher temperature of wall and ceiling surfaces in the premises than traditional decorative materials. Treated with Thermoceramic COATINGS walls are warm to the touch and does not create a feeling of chill in the vicinity (not "pull").

- Prevent condensation, moisture and mold. The surface wall and ceiling temperatures are close to the temperature of the adjacent air, always higher than the dew point. Protivoplesenni and anti-condensation properties are durable and do not diminish over time.

- Energy-saving effect. Little difference between the temperature of the wall surface and the adjacent air conditioned low density of heat flow in the corresponding surrounding structure, resulting in heat loss through decreased from 8 to 15%.

- Very good adhesion to all building materials. Cover with ease surfaces with complex shapes and structures, including and heterogeneous material.

- Good paroprovodimost. Allow the surrounding structures to "breathe."

- Do not keep dust and dirt cleaned easily with a damp sponge or cloth.

- Rich color palette. Coloring in desired color standard colors for latex recommended soft pastel tones.

ANNEX:

- In all cases, we strive to maximize the good microclimate and hygienic conditions in the living environment. For this purpose Thermoceramic COATINGS should move in as finish on all wall and ceiling surfaces of the premises.

- To limit the heat loss in winter and thus lower energy costs, especially in portable heating mode. It coating is applied on all internal surfaces of external walls and ceilings in unheated roof spaces.

- To prevent moisture condensation and mold in new construction. The coating is applied to the inner surfaces of the outer walls, niches of the windows in the corners between the outer wall and inner walls and ceiling (min 50 cm line).

- To remove condensation and mold in existing buildings (renovation). Processing affected areas, incl. min 50 cm strip around them.

TECHNOLOGY:

Thermoceramic coatings applied to dry skin, healthy and fat-free surface, min two hands with a brush or fur roller in 4-6 hours.

If the surface has been affected by mold, the same must first be removed by mold-repellent agents such as SAVO.

Functional necessary dry film thickness - min 0,3 - 0,5 mm (rate of 0.3 to 0.5 l / m2), standard on plaster board, fiberboard, old latex or well glued wallpaper. Formed from mild to moderate relief surface according to the application method. Before applying and periodically during application solution is homogenized by stirring with a slow-motion paint mixer (up to 120 rev. / Min.) Or manually with a spatula.

Basically Thermoceramic COATINGS not require dilution. Where this is required by the application method, for highly absorbent surfaces or loss of water due to evaporation, is allowed dilution with water is not more than 5% (to 50 ml of water for 1 liter TERMOPOKRITIE). Roller to move without pressure. To work with gloves and appropriate clothing. Thermoceramic COATINGS not require the use of special protective equipment.

SAFETY: as when working with latex, wash with water, keep away from children

FITNESS: Up to 12 months after the date marked on the package

For more information, packaging and price TERMOSHIELD and TERMOMAX
http://www.utilitiesbulgaria.com/contact.htm